Видео

I don't like it so far. I use a resin that needs more supports (around 70 percent to 80 depending on the model) and I can't find a adjustment setting for the density.

Mine came well levelled from the factory and has been producing great looking parts. The single linear rail was a surprise at first, especially coming from an Elegoo Saturn 3 Ultra but it has worked so far. The plastic at the top was a big confusion point aswell

Oh did i miss something? Did you hollowed the face portrait before this video ? It looks hollowed with wall thickness

Hello, your prints are perfect, I make a lot of very small scale prints in 1/64 scale, I would have some tips for supporting very very small parts, thank you.

whats the least diameter can i do ? can i do 0.2 mm for the hole?

This looks great! What printer was this and which printer would you recommend now?

@wangdennys hm i wonder what settings did you use to print this plate and it hasnt failed?

Using 4 second per layer on Elegoo 4 extreme

Hi can u please have updated support settings for chtubox v2.1? thank you

What paint do u use?

1000$ "budget" printer that get everthing worse than the printers for half the price.

Hey wang, i have some printing issues with my mega 8ks.... can you please.help me out

FauxHammer is threatening member's and telling 3d printer company to go f*ck there self ruclips.net/video/XfyXocgge2s/видео.html ruclips.net/video/d6vAkV1Ajlc/видео.htmlfeature=shared

신박한소리! 잘보고갑니다😊 구독할께요~☆

Hi, everyone feel a bit like a grave desecrator to get this thread back but, any news on this ? contacted phrozen recently and they said that they have successfully addressed the AA issue associatied with the sonic mini 8 k LCD, the solution is to get one of their new LCD screen O.O... anyone tried that and get better result on that X axis with their new LCD?

This is how it starts but then when you are unable to get the approval then it's time for plan "B". Plan "B" is Buy something really nice for her. XD

Not sure why those companies do not give you a full review test for their products by giving you free printers as samples ?!! you provide a lot of info !

No idea why there was so much hype about this printer and all the so called INNOVATIONS it has. The bar must be low for innovations in the resin printing space. To me the printer looks very cheaply built with the only INNOVATION being a resin heater which should have been standard on all printers years ago.

Thank you master, saludos

:D

Denny, I downloaded the thicker validation matrix and have used it for three different settings. None of the holes go all the way through the matrix on any exposure setting, even though the rest look good. Is this normal for the thicker matrix?

I have this issue with solid pieces.

What resin were you using at the time?

man this was so helpful - thank you!

Another great learning Mr. Wanng. Thank you

hello,.....I have a phrozen mega 8k brand new.......anyway I had a resin spill and did exactly what you said using masking tape and I still cant get the resin off the screen.....what am I doing wrong ?......please help

I doubt that u will answer, but is there a way to make it shorter?

Hi! Thnx for the helpfull info! Like always! I have a questions about your support. Why u didnt add them to the chin area? how to know that its should not be there?

You should receive a salary from the 3D printing community

3D printer manufacturers still struggling to work out how to put a USB on the front

Perfect

No priming. No spray painting but absolutely magnificent work

Amazing!

Amazing. You are a saint.

Nice video as always , which anycubic one is better from your experience,The M5 With no (S) - or the Mono X 6KS ?

Thnx for sharing! Its time to go to practise)

can you make video to understands the manual supports please?

Thank you!

Formlab y Prusa también tienen un solo riel

u r the true GOD of supports!

Where can I find the file you use for bending? I have been looking for it with no luck.

I am getting deformation on the side of the model. for example a vw bus its in the same angle as I placed 45. What can I do?

more info about the red panda miniature at 10:28 please

Wish this Video/Channel popped up sooner, would have saved hour, resin and brain cells.

Hi! Thank you for another great video! Do you mind sharing you ABS-Like Resin settings? I'm using Anycubic ABS-Like Resin+ with Elegoo Mars 4 Ultra, but I'm noticing that sometimes I lose very fine details in my prints.

Garfield pls ❤

Thank you for the information Mr. Wang!

Thank you for the tips !

13:06 I like this real talk style